User's Guide Part 2

169
Applications
Note on 3D Sweep Panorama/Sweep
Multi Angle/Sweep Panorama
･
In the following cases, 3D Sweep Panorama/
Sweep Multi Angle/Sweep Panorama do not
work properly.
- Shooting a moving object
- Shooting the main object that is too close to
the camera
- Shooting an object with repetition of the
same pattern such as a sky, beach, grass, etc.
- Shooting a big object
- Shooting an object with constantly
changing pattern such as a wave, waterfall,
etc.
･
If shooting angle does not increase enough
for 3D Sweep Panorama/Sweep Multi Angle/
Sweep Panorama within a certain period of
time, the part which was not taken is recorded
in gray.
To avoid this, move the camera faster when
shooting.
･
Because two or more images are joined
together, joints may not recorded smoothly.
･
Images may be blurred or may not be taken in
a dark scene.
･
Under the flickering light source such as a
fluorescent light, you may not be able to
shoot properly since brightness or color
balance of joined image may be unstable.
･
If brightness, color balance and focus point of
whole image to be taken with 3D Sweep
Panorama/Sweep Multi Angle/Sweep
Panorama are radically different from those of
the focused image, image may not be shot
properly.
･
In the following cases, shooting for 3D Sweep
Panorama/Sweep Multi Angle/Sweep
Panorama may be stopped.
- Moved the camera too fast/too slow
- Blurred too much
- Moved the camera in the opposite direction
of the shooting
Notes on viewing pictures shot with
3D Sweep Panorama/Sweep Multi
Angle
･
Do not view 3D images shot by the terminal
with a 3D compatible monitor for a long time.
Doing so may cause unpleasant symptom
such as eyestrain, fatigue, feeling ill, etc.
･
For viewing 3D images, you are
recommended to take a proper break.
Necessary break length or frequency varies by
individual. Judge for yourself.
･
When you experience unpleasant symptom,
stop viewing 3D images until you get healed
up and seek the advice of a doctor if
necessary. Also refer to the manuals come
with the device for connecting to the terminal
or software.