User's Guide

111
Settings
By changing Wi-Fi sleep policy, you can
choose to disable the Wi-Fi function in the
terminal when the screen backlight turns off.
You can also set the terminal to always turn
on the Wi-Fi function or to turn it on when
the terminal is charged.
❖
Information
･
When a Wi-Fi network is disconnected, connection is
automatically switched to a 3G/GPRS network.
Adding a Wi-Fi sleep policy
1
From the Settings screen (P.107),
tap [Wireless & networks]
u
[Wi-Fi
settings].
2
Tap
t
.
3
Tap [Advanced].
4
Tap [Wi-Fi sleep policy].
5
Tap any of [When screen turns off]/
[Never when plugged in]/[Never].
You can set up the terminal to connect to a
Wi-Fi network using a static IP address.
Setting up a static IP address
1
From the Settings screen (P.107),
tap [Wireless & networks]
u
[Wi-Fi
settings].
2
Tap
t
.
3
Tap [Advanced].
4
Mark [Use static IP] checkbox.
･
Item of IP settings can be selected.
5
Tap an item to enter necessary
information.
･
Enter "IP address", "Gateway", "Netmask",
"DNS 1" to use a static IP address.
6
Tap
t
.
7
Tap [Save].
Tethering stands for using mobile devices
such as smartphone as modem to allow USB
compatible devices or wireless LAN devices
to access the Internet.
Wi-Fi sleep policy Using a static IP address
Using tethering function