User's Guide

221
Applications
･
If mark is not recognized even when
holding over the IC card reader, try slightly
picking the terminal up off the reader, or
moving the terminal back, forth and around.
･
If there are metal objects between mark
and an IC card reader, scanning may be failed.
And note that a sticker put on nearby the
mark may affect communication
performance.
❖
Information
･
You can scan and write data to or from an IC card
reader without activating Osaifu-Keitai compatible
application.
･
The function is available even if the terminal is off,
but it may not be available in case you leave the
terminal off for a long time or the battery level is low,
etc.
Use "Osaifu-Keitai Lock Setting" to restrict the
use of Osaifu-Keitai function and related
services.
･
Osaifu-Keitai lock is different from screen lock
for the terminal, SIM card lock.
1
From the Home screen, tap
then tap [Osaifu-Keitai].
2
Tap
t
, then tap [Osaifu-Keitai
Lock Setting].
3
Follow the onscreen instructions
to enter unlock pattern.
❖
Information
･
is displayed in the status bar when you set
"Osaifu-Keitai Lock Setting".
･
Note that you cannot cancel "Osaifu-Keitai Lock
Setting", if the battery runs out while using "Osaifu-
Keitai Lock Setting". Be careful about remaining
battery level. If the battery runs out, charge the
terminal before canceling "Osaifu-Keitai Lock Setting".
･
You need to enter unlock pattern to use Osaifu-Keitai
menu while using "Osaifu-Keitai Lock Setting".
･
IC card unlock pattern will not be deleted even if you
reset the terminal.
･
Note that you cannot cancel "Osaifu-Keitai Lock
Setting" if you forget both the lock pattern and
answer for security question.
Locking Osaifu-Keitai function