User's Guide

155
File management
･
The terminal is connected by "Media
transfer mode (MTP)" and "Mass storage
mode (MSC)", which are USB
connection modes set by default, and 2
screens "Xperia acro HD SO-04D" and
"
リムーバブル ディスク
(Removal disk)"
appear on the PC. "Media transfer mode
(MTP)" allows you to access the internal
storage and "Mass storage mode
(MSC)" allows you to access the
microSD card inserted into the terminal.
2
Tap [Skip].
❖
Information
･
Window that appears when connecting to a PC may
vary depending on the operating system (OS) of a
PC.
･
While in a connection, drag the status bar
downwards and tap [Internal storage connected] or
tap [SD card connected]
u
[Connectivity settings] to
check connection status or change the following
connection settings.
･
If you mark [Auto connect in MSC] and connect the
terminal to a PC, microSD card can be accessed as a
removal disk. microSD card cannot be accessed from
the terminal and functions using microSD card may
become unavailable in Camera, Gallery, Music player,
etc.
･
If you install PC Companion, you can use the
following applications on a PC for managing media
files, creating backup files, etc. when connecting the
terminal and the PC. For details, check on the PC
Companion screen after installation.
Install PC
Companion
Display PC Companion installation
wizard when connected to a PC.
USB connection
mode
Check initial settings when
connecting to a PC.
Auto connect in
MSC
When the terminal is connected
to a PC, USB connection mode is
set to "MSC" automatically. If you
unmark the checkbox, you cannot
access microSD card from a PC.
Tethering Set terminal data communication
via USB cable or as portable Wi-Fi
hotspot. (P.116)
Trusted devices Connect the terminal and a host
device in a pair via Wi-Fi network.
(P.161)
Media Go P.162
Support Zone Update software of the
terminal connecting to a PC.
(P.254)
Sync Zone Synchronize calendar and
contacts between Outlook and
the terminal.
File Manager Check file type, update time,
location, etc. on the terminal.
Contacts Setup Copy the contacts data of the
mobile phone previously used
to the terminal.
Back up and restore Back up the terminal data or
move the data to another
terminal.