User's Guide

111
Settings
3
Enter [Network SSID] name of the
Wi-Fi network you want to add.
4
Tap [Security] field, then mark a
radio button of security type for
the Wi-Fi network you want to add.
･
4 options, "Open", "WEP", "WPA/WPA2
PSK", or "802.1x EAP", appear.
5
If required, enter security
information for the Wi-Fi network
you want to add.
6
Tap [Save].
Viewing detailed information on a
connected Wi-Fi network
1
From the Settings screen (P.107),
tap [Wireless & networks]
u
[Wi-Fi
settings].
2
Tap the Wi-Fi network that you are
currently connected to.
･
The detailed network information is
displayed.
❖
Information
･
From the Settings screen (P.107), tap [Wireless &
networks]
u
[Wi-Fi settings] and tap
t
and
[Advanced] to check "MAC address" and "IP address".
By changing Wi-Fi sleep policy, you can
choose to disable the Wi-Fi function in the
terminal when the screen backlight turns off.
You can also set the terminal to always turn
on the Wi-Fi function or to turn it on when
the terminal is charged.
❖
Information
･
When a Wi-Fi network is disconnected, connection is
automatically switched to a 3G/GPRS network.
Adding a Wi-Fi sleep policy
1
From the Settings screen (P.107),
tap [Wireless & networks]
u
[Wi-Fi
settings].
2
Tap
t
.
3
Tap [Advanced].
4
Tap [Wi-Fi sleep policy].
5
Tap any of [When screen turns off]/
[Never when plugged in]/[Never].
Wi-Fi sleep policy