User's Manual

Confidential
INTERFACE DESCRIPT
14(31)
Document number Revision
1/155 19-KRD 104 1025 Uen PA4
Figure 3.1-2 Layout Detail – Reservoir capacitor version (reference only)
3.2 Variant Information
As evident from the preceding section, there is more than one version of the Daughter Card.
The “/3” version notably differs from the “/2” version by the type of system connector and
board mounting hole locations. This section will describe in detail the differences between
the variants.
3.2.1 Board Outline
The board outline differences have been made to accommodate the reservoir capacitor.
3.2.2 System Connector
The system connector mounted on the various versions is summarized in the following
table. Additional information on the system connector can be found in section 4.1.1
Variant P/N Connector Type Connector Lead Free Status
TBD Vertical mount Lead Free
Note: The lead-free status should be considered when selecting the mating FFC/FPC.