User's Manual

56 Start Using Wireless Manager
Connect/Disconnect
If you are currently disconnected, the menu gives you the option to connect to the most recently used
GC89 GPRS/EDGE connection. If you are connected the menu gives you the option to disconnect.
Help
Opens the Wireless Manager Online Help. You can also launch the Online Help from the Wireless
Manager Help Menu. Pressing F1 in any of the Wireless Manager dialogs opens the relevant help
screen.
About
Displays a dialog that contains Wireless Manager software information.
Hide to Tray
Select the Hide to Tray option to visually close Wireless Manager leaving only the icons visible in
the system tray. Use the Open Wireless Manager option to view the software again.
Exit
Exits the Wireless Manager application completely. Use the stop/remove commands if you wish it
to remain in the background. See Safe Removal of the GC89 on page 57 for more details.
GC89 Wireless Control menu
Right click on one of the following icons to see the GC89 Wireless Control menu options.
The GC89 Wireless Control menu options are described below.
Help
This menu option provides information about the GC89 Wireless Control Utility.
Country (Where provided)
This menu option allows you to select the operating characteristics that comply with the regulations
that apply in a particular country. Before connecting to a wireless network, you should verify that
the Country value is correct. If you travel to different countries, you must remember to change the
Country as appropriate.
If the destination country is not listed, set the value to Worldwide.
Open Utility
Opens the Wireless Configuration Utility.
See Create a Wireless LAN Connection on page 18 for details.
Note:
Use this option to access the WLAN functions if there is no SIM in the GC89.
or
or
The GC89 Wireless Control menu is displayed.