User's Manual
Table Of Contents
- Content
- Introduction
- Getting Started
- Installation
- Start Using Wireless Manager
- Create a Connection
- Wireless Manager Status Screen
- Wireless Manager Telephony Settings Screen
- Wireless Manager SMS Messages Screen
- Wireless Manager Phone Book Screen
- Wireless Manager Online Services Screen
- Troubleshooting
- Additional Information
- Appendix A - Connection Parameters
- Glossary
- Index
Installation 11
subsequently reboot with error messages relating to missing files. Therefore, it is strongly
recommended that the Windows 98SE CD-ROM is available before installation starts.
6. Select the driver file requested by the Wizard and click Open. The Hardware Wizard finishes the
installation.
Note:
If you are prompted to reboot the laptop during software installation, you may find that the
Wireless Manager attempts to start before all of the drivers are installed. The scenario is that
the New Hardware Wizard is still busy installing the 3 device drivers, the Wireless Manager
splash screen appears, followed by a warning dialog saying ”You must have a EDGE PC Card
Wireless Modem installed to run this application. Please install a EDGE PC Card Wireless
Modem and try again”. Click OK. Wait for the New Hardware Wizard to complete, rebooting
the laptop if required, then start the PC Card Manager using the icon on the desktop or via
Programs Sony Ericsson Wireless Manager.
7. Select Programs Sony Ericsson Wireless Manager to start using your EDGE PC Card.
8. The EDGE PC Card and Wireless Manager are ready for use.