User's Manual

M608c Control panel 73
This is the Internet version of the user's guide. © Print only for private use.
Creating a new calling card
Select New and enter the following account
information.
Access tab
Name – enter a name for the calling card
account.
Access number – enter the phone number
of the calling card server.
Verification code – enter the verification
code.
International prefix – enter the
international prefix used by the server.
Set up tab
Sending order – select if the phone
number or verification code should be sent
first.
Delay for number/code – set the time the
phone should wait before it sends the
number or code.
Use direct access number – if marked,
you are allowed to use a direct access
number, if the calling card is a PBX type.
Business phone services
You can set up business phone services by
importing a .pbx configuration file that you
receive from your Telephony/IT department.
To set up business phone services
1. Create a folder called
Calling cards in the
Document folder of your phone or
Memory Stick and copy the .pbx
configuration file to that folder.
2. Select
Tools > Control panel > Call
settings > Calling cards > Import
.
3. Select the .pbx file you want to import and
tap
Import.
4. Activate the card by setting the Calling
Card Mode to
Call directly, Always use
calling card
or Prompt before call.
The calling card icon will now be visible
in the status bar. The .pbx file may be set up so
that you can send commands to the
switchboard by tapping the calling card icon.
Call waiting
You can choose if you want the phone to alert
you when you receive an incoming call during
an ongoing call.
Select
Tools > Control panel > Call settings >
Call waiting
and set this option to On/Off.
If ALS (two lines on the SIM card) is
available, you can set this option to
On/Off on
two separate voice lines.
The settings are made in the network. Select
More > Refresh to receive the current settings.