User's Manual

18 Getting to know your phone M608c
This is the Internet version of the user's guide. © Print only for private use.
Note: Simultaneously pressing with a
character key will insert an uppercase
character. Releasing after this action
will revert the case to lowercase. The same
principle applies when and a key is
pressed to access a symbol from a key.
To input Chinese characters
A: Element bar: The area to display Pinyin/
Stroke input by users when the users want
to input Chinese through pinyin/stroke
input method. Element bar border can be
adjusted with flush right according to the
pinyin/stroke input length.
B: Candidates bar: The area which to display
the candidates according to Pinyin input by
the users. There are at most nine Chinese
single character candidates per row.
C: Display Area: The area which to display
the characters.
1. If required, select the desired Chinese text
entry method.
2. Input elements; the elements are shown to
the right, candidates are shown on top.
Refer to the mapping below. Continue
inputting elements until the correct
character is shown.
3. Rotate the Jog Dial to select the correct
character.
4. Press the Jog Dial to confirm the correct
character.
Inserting symbols
There are a number of ways to insert symbols
with the keyboard.
• Press the left side of the or
keys to show additional symbols in the
pre-edit box in the title area.
• Use to access the symbols on the
keys.
All upper characters
Press twice to lock the characters
at the top of the keys. Any additional
keys pressed will type the upper
characters until is pressed again.
123
ALT
ALT
ALT
,
Z
+
–
.
ALT