User's Manual

60 CommuniCorder
You can also press the Jog Dial, or, when the flip is open, tap the
capture button at the bottom of the screen to record a
video clip.
By default the video clips you record are stored internally in the
Unfiled folder. Tap the folder menu to the right in the menu bar to
change the storage location to another location, for example, on
a Memory Stick. See ‘Folders’ on page 28 for more information
on using folders.
To send a video clip you have just recorded in flip closed, select
Send as MMS from the flip closed context menu. In flip open, tap
.
Note Most operators only accept video clips of 10 seconds
length or 95 KB size.Use the Message video mode, or the Video
limit setting in Video mode to limit the file size.
Open the flip to access the full range of CommuniCorder
settings. With the flip open, the CommuniCorder is activated by
selecting
> .
To delete the last video clip
1. Select CommuniCorder > Delete clip .
2. Confirm the delete operation.
To delete a video clip you have just recorded in flip closed,
select Delete clip from the flip closed context menu.
To manage video clips, tap to go directly to
Video . See
‘Video’ on page 68 for more information.
Delay timer
CommuniCorder has a delay timer with a delay of 1-25 seconds.
The delay time is the time between the moment you activate the
shutter release and the moment when the recording starts.
To set the delay time
1. Tap CommuniCorder > Preferences.
2. Tap and set the desired delay time
To record video with delay timer
1. Tap CommuniCorder > Delay timer.
2. Press the camera button. The timer beeps for the set time and
a timer icon is shown before the recording is started.
When the delay timer is set, you will see the timer status icon
.
3. Tap
CommuniCorder > Delay timer to deactivate the timer.