User's Manual

150 Control panel
Time & date
Adjusting the time and date here sets these throughout your
P910i.
The dialog has three tabs. You can set:
Note These settings are also available in the
Time
application.
Time & date tab
To set the current date
1. On the
Time & date tab, select the date. A calendar view opens.
Tap the arrows to set the current year and month.
2. Select the current date.
To set the current time
1. On the
Time & date tab, select the time. Select the upper half of
the hour or minute box to increase the number displayed, or
the lower half to decrease the number.
2. Select the am / pm box.
This is only possible if you use the 12-hour time format.
3. Confirm by tapping outside the time picker.
If the locations you have set under Control panel >
International are in a country/region that currently has
summertime (daylight saving time), you can adjust the time and
date.
To turn daylight saving time on
1. On the
Time &date tab, select Summertime, select the check
boxes for the zones that currently have daylight saving time.
2. Select
Done .
Format tab
You can specify how you want the time and date to be displayed
on the screen, and if you want to use the 12-hour (am/pm) or 24-
hour time format.
To set the time and date display format
1. Select Date format and choose a format.
2. Select Date separator and choose a separator.
3. Select a
Time format .
4. Select
Time separator choose a separator.
5. Select Done .
Time & date
The current time and date. Here you can also turn
Summertime (daylight saving time) on or off for your
location.
Format
Specify how you want the time and date to be displayed
on the screen.
Workdays
Specify the days in your working week.