User's Manual

12 Getting to know your P910i
SIM card.
When you register as a subscriber with
a network operator, you receive a SIM
(Subscriber Identity Module) card. The
SIM card contains a computer chip that
keeps track of your phone number, the
services included in your subscription
and your phonebook information,
among other things.
A PIN (Personal Identity Number)
code is supplied with the SIM card
from your operator and must be entered
when switching on the P910i.
Open the battery cover by pressing slightly on its upper part and
slide it down the P910i. Insert the SIM card as shown in the
picture.
Some subscriptions are limited to call only predefined numbers,
so-called Fixed Dialing Numbers (FDN). To avoid problems
when traveling abroad, these predefined numbers should be
defined as international numbers starting with +, for example
[phone]. In order to speed up calling while at home, the
same numbers can also be added in the national number format,
for example 013244500.
For more information. see ‘Copying contacts to and from the
SIM card’ on page 106.
Battery
Before you use your P910i for the first time, charge the battery
provided for at least 4 hours. Use the supplied charger. See
‘Charging the battery’ on page 13.
Insertion and removal
To insert the battery
1. Ensure that the flip is closed.
2. Remove the battery cover by
sliding it downwards.
3. Place the battery in the battery
compartment and close the
cover.
To remove the battery
1. Ensure that your P910i is
turned off.
Note It is important that you always turn off your P910i before
removing the battery. Failure to do so can result in loss of
information.
2. Remove the battery cover by sliding it downwards.
3. Use your fingernail at the lower left-hand edge of the battery
to gently lift the lower edge of the battery outwards.
4. Take out the battery.