User's Manual

Phone 43
To end a call
Select End call , or press Jog Dial.
Incoming calls
When you receive a call, if the calling party is found in
Contacts, the name of the caller is displayed. If there is a picture,
it is also shown in a small or large version. See ‘Incoming call
picture’ on page 50.
To handle an incoming call
Use the screen buttons to select what to do.
•
Answer – Answer the call.
•
Send Busy – Reject the call. The calling party hears a busy
signal, and the call is logged as a rejected call.
• Mute – Silence the ringtone. The calling party will not notice
that you have silenced the call. The call is logged as a missed
call.
You can also answer by voice control, see ‘Voice control’ on
page 50.
Options during or after a call
There are several options available, depending on the situation.
You can access some of them using the screen buttons, by
tapping the field with the calling party details, or on the menus.
Options that concern two or more active calls are described in
‘Handling two or more calls’ on page 44.
•
End call – End the active call.
•
Hold call/retrieve call – Put the active call on hold/retrieve the
held call.
• Add to contacts – Create a new Contacts entry. This option
appears automatically after a call if the phone number of the
call is known, and not already stored in Contacts. See ‘Add to
contacts’ on page 51.
• Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
• Zoom in/out – Enlarge/reduce the view.
•
Copy number – Copy a phone number for exchange with other
text fields or applications.
• Paste number – Paste a copied number into a field
Tap to make the following adjustments:
•
Call volume – Adjust the volume in the phone. This is easier to
do with Jog Dial.
• Silent mode – All audible ringtones are turned off.
•
Speakerphone – Activate the P900 as a speakerphone.
• Mute microphone – Turn the microphone on or off.