User's Manual

Getting to know your P900 11
SIM card
When you register as a subscriber
with a network operator, you receive a
SIM (Subscriber Identity Module)
card. The SIM card contains a
computer chip that keeps track of your
phone number, the services included
in your subscription and your phone
book information, among other things.
A PIN (Personal Identity Number)
code is supplied with the SIM card
from your operator and must be
entered when switching on your P900.
Open the battery cover and insert the
SIM card as shown in the picture.
Some subscriptions are limited to call
only predefined numbers, so-called Fixed Dialing Numbers
(FDN). To avoid problems when traveling abroad, these
predefined numbers should be defined as international numbers
starting with +, for example [phone]. In order to speed up
calling while at home, the same numbers can also be added in
the national number format, for example 013244500.
For more information. see ‘Copying contacts to and from the
SIM card’ on page 100.
Battery
Before using your P900 for the first time, charge the battery
provided for at least 4 hours. Use the supplied charger. See
‘Charging the battery’ on page 12.
Insertion and removal
To insert the battery
1. Ensure that the Flip is closed.
2. Remove the battery cover by
sliding it downward.
3. Place the battery in the
battery compartment and
close the cover.
To remove the battery
1. Ensure that your P900 is
turned off.
Note It is important to always turn off your P900 before
removing the battery. Failure to do so can result in loss of
information.
2. Remove the battery cover by sliding it downward.
3. Use your fingernail at the lower lefthand edge of the battery
to gently lift the lower edge of the battery outward.
4. Remove the battery.