User's Guide

DRAFT
8Overview
2. Orient the arrow on the memory card toward the slot and insert the memory into the slot until it
clicks. Install M2 Memory Stick Micro™ with the contacts in the up position. as shown below.
Install MicroSD Memory with the contacts in the down position
Note:
You may require a small tool to recess the memory card into the MD400 Broadband Modem.
3. Replace the door over the memory slot.
To remove memory card
1. Open the small door over the memory slot.
2. Push the memory card into the slot until it clicks and release.
Note:
You may require a small tool to push the memory card.
3. Grasp the memory card and remove it from the MD400.
4. Replace the door over the memory slot.
To access the memory card
The memory card can be assessed through Windows Explorer. It appears as a removable storage
device.