User's Guide Part 3

25Getting to know the phone
Draft for Sony Ericsson Internal Use Only
To enter " 信息 " using Pinyin input
1 Select Chinese as the input
language.
2 Select Pinyin as the input method.
3 Enter "xin" by pressing ,
, .
4 Select "xin" using the navigation
key, and then select "
信 " from the
candidate list.
5 Enter "xi" by pressing ,
.
6 Select "xi" using the navigation
key, and then select "息" from the
candidate list.
To enter "
信息 " using Stroke
input
1 Select Chinese as the input
language.
2 Select Stroke as the input
method.
3 Enter " ", " " and " " by pressing
, , .
4 Use the navigation key to select "
信 ".
5 Enter " ", " " and " " by pressing
, , .
6 Select " 息 " from the candiate list.
To enter " 互 " using the wild card
key
1 Select Chinese as the input
language.
2 Select Stroke as the input
method.
3 If you only know that " 一 " is the
first and the last stroke of the
character " 互 " and that the total
number of strokes is four, enter
, , , .
4 Select " 互 " from the candidate
list.
To enter symbols
1 Open the symbol table by
pressing .
2 Use the navigation key to select a
symbol.
This function is not available when
you are under number input mode
.