User's Guide Part 1

11Getting started
Draft for Sony Ericsson Internal Use Only
Using the USB charger
To connect the charger and
charge the battery
1 Connect the USB cable plug to
the AC adapter USB socket, as
shown in the above illustration.
The USB cable is supplied with
your phone.
2 Connect the USB cable connector
to your phone. Press a key to view
the charging status on the screen.
It takes approximately 2.5 hours
to fully charge the battery.
To remove the charger
1 Charge your battery until the
battery icon indicates a full
charge.
2 Tilt the USB charger connector
upwards to remove it.
Note:
1 The USB cable for the new USB
charger shown in the illustration
(Part. B in the new-type charger
illustration) on page 7 is only
intended for charging your
phone. Do not use it for
transferring data.