User's Manual

35Imaging
This is the Internet version of the user's guide. © Print only for private use.
Changing the camera settings
Most of the settings you make will
remain until you change them, even if
you have switched the camera or your
phone off.
To change the settings
1 Press the Jog Dial to open the list of
settings.
2 Rotate the Jog Dial to move through
the list and see the options for each
setting. Press the Jog Dial to select a
setting to change.
3 Rotate the Jog Dial to scroll through
the options and press it to select the
required option for the setting.
4 Press the back button to return to
camera mode.
The settings will vary depending on
whether picture or video mode is
selected. The settings are:
Press to see how you can use
the keypad keys as shortcuts for
some of the most frequently used
settings. Press the key again to
remove the description.
You can also select Settings and use
the stylus to change the settings.
Shoot mode – select what sort of
pictures to take. Burst takes four
pictures in rapid succession.
Frame size – select what picture
or video size to use. The Frame
size might decrease when you
zoom in.
Auto focus – allows the camera
to automatically focus the
camera lens.
Select Macro for extreme close-
ups.
Video file size – select
Messaging to limit the length
and size of video clips (when
recording) so that they can be
sent as MMS.
White balance – select an option
that matches the lighting
conditions.
Light – only for still pictures:
Select On to enable the photo
light.