User Manual

A Dial-Up Networking connection can be established only in Radio On

mode. The Connect button is disabled

(greyed) in Radio Off mode.

PC Card Icon

The PC Card icon is used as part of the procedure to remove the GC75 PC Card.

To remove the GC75 PC card:

1. Right-click on GC75 Manager icon

and select

Exit

2. Left-click on the PC card icon and select Stop GC75 or right-click on the PC Card Icon and select

Unplug or Eject Hardware

and Stop the card.

The PC Card icon is displayed in the taskbar area when the GC75 PC Card is properly inserted into

the PC card slot.

Phone Locked Dialog

Phone Lock is a means by which you can protect your GC75 PC Card against theft or unauthorized use.

When enabled, the GC75 PC Card will not operate until the Phone Lock code has been entered. Phone lock is

additional to the PIN

, which protects the SIM.

If your phone is locked and you are required to enter the phone's lock code, a Phone Locked dialog is

displayed. Enter the code and select

Only numerical digits are allowed for Phone Lock.

Note: For security reasons, the code digits are always shown as asterisks in the entry field.

SIM Card Locked Dialog

If your SIM Card is locked and you are required to enter the PIN code, a SIM Card Locked dialog box is

displayed. Enter your PIN code and select

Only numerical digits are allowed for SIM Lock.

Note: For security reasons, the PIN code digits are always shown as asterisks in the entry field.

If the PIN code that you have typed is incorrect, the dialog box re-appears and you have two remaining

attempts to enter the correct code. The SIM card will be blocked after three failed attempts.

If you enter your PIN incorrectly three times in a row, the SIM card is blocked and you need a PUK

code to

unblock the SIM card.

For further information, contact your network operator.