User Manual

z
FAX
The phone number used to send a FAX to the GC75.
Click
Apply
when you have finished changing the settings, to transfer your settings to your GC75 PC Card.
This may take a few seconds.
Note: if you change these numbers to some incorrect phone numbers and you forget the original numbers, you
may need to call your service provider to get the correct numbers back for your SIM
.
SMS Service Center
When you send a text message, it is first sent to your network operator's service center, which then forwards it
to the correct recipient. The SMS
Service Center is identified by a telephone number.
To set or change the SMS Service Center number:
1. Enter the phone number of your operator's service center in the
Number
text box.
2. Click
Apply
to transfer the setting to your GC75 PC Card.
Locks
This section covers the following topics:
z Phone L ock
z SIM Lock
z PIN
z Changing the Phone Lock Code
Phone Lock
The phone lock protects your GC75 PC Card against unauthorized use if it is stolen and used with another
SIM
card. The phone lock is not activated when you buy the GC75 PC Card. You can change the default
security code 0000 to any four- to eight-digit personalized code.
The phone lock has three options:
On
,
Off
and
Auto
:
z
On
- If you choose this alternative, you briefly see the message Phone locked, each time you turn on
the GC75 PC Card . The message is followed by the prompt Enter lock code. You then have to enter
your code followed by YES to use the GC75 PC Card .
z
Off
- The GC75 PC Card is no longer locked.
z
Auto
- The message
Phone locked
and the prompt
Enter lock code
do not appear until a different
SIM card is inserted into the GC75 PC Card. After the security code has been entered correctly, the
GC75 PC Card can be used with the new SIM card. You are not asked to enter the security code until
the original SIM card or a different SIM card is inserted
When you are satisfied with the settings, click
Apply
.
Pa
g
e 3 of 12Tele
p
hon
y
Settin
g
s
4/11/2003file://C:\tem
p
\~hh29E6.htm