User's Guide

9English
4 Select Manual or Automatic. If you
select Automatic, the car handsfree
automatically selects the most
appropriate setting due to the
surrounding light. If you select
Manual, you have to select the light
intensity yourself – Dim, Normal or
Bright.
5 To return one step at a time, press .
To return to idle mode, press and hold
down .
To view the car handsfree software
version
1 Press the menu key.
2 Scroll to Settings and press the menu
key (or ).
3 Scroll to Service info and press the
menu key (or ). The software version
appears.
Troubleshooting
For product support, go to
www.sonyericsson.com/support.
No connection to the phone
1 Make sure the car handsfree is
charged and within range of the
phone.
2 Check or redo the Bluetooth settings
in the phone.
3 Try to pair the car handsfree with your
phone once again.
Resetting the car handsfree
There are two ways to reset the car
handsfree:
• Hardware reset – if the car
handsfree behaves unexpectedly
• Master reset – to restore the factory
settings
To perform a hardware reset
1 Make sure the car handsfree is turned
on.
2 Press and hold down until the car
handsfree is turned off (after about 10
seconds).
To perform a master reset
1 Make sure the car handsfree is turned
on.
HCB-150_UG_P1C_EN.book Page 9 Tuesday, March 18, 2008 10:55 AM