User's Manual

English

Installing

The Bluetooth Car Handsfree HCB-700 kit

includes:

• electronic box with velcro (1)

• external loudspeaker (2)

• control unit with adhesive tape (3)

• microphone (4)

• hub (5)

• display with adhesive tape (6)

• cables (power cables, ignition sense, music

mute)

•user guide

Mounting

You can mount the control unit, the display and the

microphone by using adhesive tape, screws or car

clips:

• If you use the adhesive tape to attach the control

unit, the display or the microphone, make sure

you clean the area where you want to attach it,

using a suitable grease-dissolving cleaning

agent. Then remove the paper, put the control

unit, the display or the microphone at the

selected position and press firmly.

• If you mount the control unit and display by

using screws, make sure that the proper screws

are used. Contact your car dealer.

• If you do not want screw holes in your car,

contact your car dealer for a unique car clip that

can be attached without using screws.

5 6

Please make sure that all equipment of the car hands-

free is installed in a safe location. If your car is

equipped with an air bag, check that the handsfree

equipment does not interfere with its function.

HCB-700_UG_EN.book Page 17 Wednesday, April 20, 2005 1:05 PM