User's Manual

11
English
• To dial a #, say Hash.
• To delete a sequence of numbers say Clear.
• To interrupt the session, say Cancel.
4 Say Dial or press to make the call.
5 Press to end the call.
Settings
When voice digit dialling is enabled, you can make
the following settings:
• Voice language – to decide in what language you
want to say the commands.
• Command playback – to let all recognized voice
tags be spoken back to you, by the car handsfree.
• Voice prompts – to let spoken user instructions
be spoken back to you, by the car handsfree,
before the recognition window opens. If voice
prompts is turned off, a tone is played instead.
• Speaker adaptation – to adapt the car handsfree
voice recognition to your voice.
To set the voice language
1 To enter the settings menu, press the menu
button.
2 Scroll to Digit dialling, and press .
3 Scroll to Voice language, and press .
4 Scroll to a language, and press .
5 To exit the menu, press the menu button.
To activate command playback
1 To enter the settings menu, press the menu
button.
2 Scroll to Digit dialling, and press .
3 Scroll to Command playback, and press .
4 Scroll to On to activate the command
playback, and press .
5 To exit the menu, press the menu button.
To activate voice prompts
1 To enter the settings menu, press the menu
button.
2 Scroll to Digit dialling, and press .
3 Scroll to Voice prompts and press .
4 Scroll to On to activate the voice prompt, and
press .
5 To exit the menu, press the menu button.
The languages that can be selected as voice language
are: English, German, French, Italian, Spanish, Por-
tuguese or Swedish.
HCB-700_UG_EN.book Page 11 Wednesday, April 20, 2005 1:05 PM