User's Manual

English

Getting started

Before you use the car handsfree with a phone for

the first time, you need to make sure that:

• The car handsfree kit is properly installed and

turned on.

• Bluetooth is turned on in your phone.

• The car handsfree is added to the list of devices

in the phone.

To add the car handsfree to a phone

1 Turn on the ignition of the car. The car

handsfree will then be switched on

automatically.

2 If you see rotating arrows on the display, go

straight to step 3, if not press and hold the

button until the rotating arrows appear and a

long high tone is played. You can also press the

menu button, scroll to Add phone, and press

3 Prepare your phone according to the phone

user guide. The car handsfree passkey is 0000.

When the car handsfree has been successfully

added to the phone you will be guided through the

following settings:

• Menu language

• Digit dialling

• Voice language (for Digit dialling)

To scroll in the menus, use the volume control. To

select press . For more information about the

options in the list, see their respective sections in

this user guide.

Phone name

The name of the phone will appear on the display.

If you want to add a phone model that has already

been added to the phone, you need to change the

name of the phone. For more information please

refer to your phone user guide.

Network

Network OK or No network, on the display,

indicates the status of the connection between the

phone and the mobile network.

HCB-700_UG_EN.book Page 7 Wednesday, April 20, 2005 1:05 PM