User's Manual

12
English
Draft for Sony Ericsson Internal Use Only
To install the car handsfree
1 Disconnect the car battery.
2 Place the electronic box under the dashboard
of the car. See also installation chart “1.” on
page 2. We recommend that the upper side of
the electronic box faces the driver with no
metallic barrier between the box and the driver.
Use the velcro enclosed in the kit to fasten the
electronic box.
3 Connect the bundle of power cables (red and
black), music mute cable (yellow) and ignition
sense cable (blue) to the electronic box.
4 Connect the black power cable to negative
ground. Connect the red power cable, with the
integrated fuse, to the positive pole at the car
battery. Please note that supply voltages other
than 12 Volts may cause damage to the
equipment.
5 Connect the yellow music mute cable to the
car stereo. See A in installation chart “1.” on
page 2.
6 Connect the blue ignition sense cable to the
ignition of the car. See B in installation chart
“1.” on page 2.
7 Place the microphone on a fixed part of the car
interior, and directed towards the driver. Make
sure that the cable is long enough to reach the
electronic box. Connect the microphone to the
electronic box.
8 Place the loudspeaker at least 50 cm
(20 inches) from the microphone. Make sure
that the cable is long enough to reach the
electronic box. Connect the external
loudspeaker to the electronic box.
9 Choose a suitable location on the dashboard of
the car for the control panel. The driver must
be able to reach the keys of the control panel
from the normal driving position. Make sure
that the cable is long enough to reach the
electronic box. Remove the adhesive tape from
the control panel. Place the control panel in the
location you have chosen. Connect the control
panel to the electronic box.
10 Connect the car battery.
To install an advanced music mute
with the car handsfree
1 Disconnect the car battery.
You can buy an advanced music mute separately.
HCB-300_UG_EN.book Page 12 Monday, March 8, 2004 10:16 AM