User's Manual

10
English
Draft for Sony Ericsson Internal Use Only
Troubleshooting
This section lists some problems that you might
encounter while using your car handsfree.
Cannot add the car handsfree to the
list of devices in the phone
The Bluetooth function in your phone must be
turned on. Your phone should be inside the car
during the procedure and the car handsfree must be
on.
Cannot connect to the car handsfree
The car handsfree may be connected to another
Bluetooth device. Select manually another
ColorID, see “Adding the car handsfree”
on page 6.
Your phone may be connected to another
Bluetooth device, such as a headset. Disconnect the
other Bluetooth device.
You may have added another handsfree device
to the list of devices in your phone. Some phones
can only have one handsfree device in the list at a
time. Please refer to the phone’s user guide.
Connection interrupted
You hear a short sound if the connection between
the phone and the car handsfree is interrupted. Try
connecting them again by pressing .
Using headset and car handsfree
Please refer to the phone’s user guide on how to
use your phone with several Bluetooth devices.
Resetting the car handsfree
You may want to reset the car handsfree to default
settings.
To reset the car handsfree
1 Turn on the car handsfree.
2 Press and hold until the ColorID flashes
and you hear a long high tone.
3 Press and hold until you hear a long high
tone.
4 The car handsfree is now reset.
Some car handsfree functions do not
work
If you notice that you cannot make use of all the
features in the Bluetooth Car Handsfree HCB-300,
please check in the phone’s user guide whether
your phone supports the function. You can also
HCB-300_UG_EN.book Page 10 Monday, March 8, 2004 10:16 AM