Bluetooth™ Headset HBH-GV435a English Language Language Language
Bluetooth™ Headset HBH-GV435a O User Guide User Guide User Guide User Guide Sony Ericsson HBH-GV435a This manual is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice.
Introduction Introduction Introduction Introduction P Bluetooth™ Headset HBH-GV435a The Bluetooth™ Headset HBH-GV435a can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Bluetooth™ Headset HBH-GV435a The Bluetooth™ Headset HBH-GV435a can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile.
Q Call handling button Call handling button Call handling button Call handling button Indicator light (LED) Indicator light (LED) Indicator light (LED) Indicator light (LED) Decrease volume Decrease volume Decrease volume Decrease volume Increase volume Increase volume Increase volume Increase volume Power button Power button Power button Power button Microphone Microphone Microphone Microphone
R Charging connector Charging connector Charging connector Charging connector Speaker Speaker Speaker Speaker
S User Guide symbols User Guide symbols User Guide symbols User Guide symbols Press and release Press and release Press and release Press and release Press twice within 1/2 second Press twice within 1/2 second Press twice within 1/2 second Press twice within 1/2 second Press and hold Press and hold Press and hold Press and hold Press and hold simultaneously Press and hold simultaneously Press and hold simultaneously Press and hold simultaneously Steady red light Steady red light Steady red light Stead
User Guide symbols (continued) User Guide symbols (continued) User Guide symbols (continued) User Guide symbols (continued) Red flash Red flash Red flash Red flash Green flash Green flash Green flash Green flash Beep tone Beep tone Beep tone Beep tone Ring signal Ring signal Ring signal Ring signal First time use: Charge until the LED turns green. First time use: Charge until the LED turns green. First time use: Charge until the LED turns green. First time use: Charge until the LED turns green.
U Getting started Getting started Getting started Getting started Charging Charging Charging Charging Charging Charging Charging Charging Fully charged Fully charged Fully charged Fully charged Battery needs charging Battery needs charging Battery needs charging Battery needs charging
Adding the headset to the phone Adding the headset to the phone Adding the headset to the phone Adding the headset to the phone V 20 cm Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions from the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Turn on Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices. 3.
NM 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. After you have added the headset to the phone, it will automatically connect to the phone as soon as it is turned on and within range.
4. If your phone supports auto pairing, press YES when Add device? appears in your phone to complete the procedure. If not, continue with step 5. NN 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. After you have added the headset to the phone, it will automatically connect to the phone as soon as it is turned on and within range.
3. Prepare your headset according to page 14. NO 4. If your phone supports auto pairing, press YES when Add device? appears in your phone to complete the procedure. If not, continue with step 5. 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.
instructions from the phone user guide on how to turn on Bluetooth in your phone. NP 1. Turn on Bluetooth in your phone. 2. Turn on Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 14. 4. If your phone supports auto pairing, press YES when Add device? appears in your phone to complete the procedure. If not, continue with step 5. 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device.
Prepare the headset Prepare the headset Prepare the headset Prepare the headset Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17).
Optimal range and wearing Optimal range and wearing Optimal range and wearing Optimal range and wearing NR Objects, walls and a greater distance than 5 m can effect the sound. Wear your headset on the same side of your body as your phone for best performance. Objects, walls and a greater distance than 5 m can effect the sound. Wear your headset on the same side of your body as your phone for best performance. Objects, walls and a greater distance than 5 m can effect the sound.
NS Putting the headset on Putting the headset on Putting the headset on Putting the headset on Left and right ear use Left and right ear use Left and right ear use Left and right ear use Make sure you twist the speaker round into your ear. Make sure you twist the speaker round into your ear. Make sure you twist the speaker round into your ear. Make sure you twist the speaker round into your ear.
NT Calling Calling Calling Calling Turning the headset on Turning the headset on Turning the headset on Turning the headset on (5(2 s) S) Turning the headset off Turning the headset off Turning the headset off Turning the headset off (5(2 s) S)
e_eJdsQPR~ e_eJdsQPR~ ïïïKëçåóÉêáÅëëçåKÅçã pçåó=bêáÅëëçå=jçÄáäÉ=`çããìåáÅ~íáçåë=^_ pbJOON=UU=iìåÇI=pïÉÇÉå NOMOJQPQO=mN` mêáåíÉÇ=áå=uuuu
Answering a call Answering a call Answering a call Answering a call NV
Making a call Making a call Making a call Making a call OM
ON Using voice commands Using voice commands Using voice commands Using voice commands Voice commands, such as dial, redial, answer and reject, can be very useful when you are using the headset. For more information on voice commands, and if your phone supports it, refer to the phone user guide. Voice commands, such as dial, redial, answer and reject, can be very useful when you are using the headset. For more information on voice commands, and if your phone supports it, refer to the phone user guide.
Making a call using voice commands Making a call using voice commands Making a call using voice commands Making a call using voice commands OO
Redialling Redialling Redialling Redialling OP
OQ Transferring sound Transferring sound Transferring sound Transferring sound To transfer from headset to phone, refer to the phone user guide. To transfer from headset to phone, refer to the phone user guide. To transfer from headset to phone, refer to the phone user guide. To transfer from headset to phone, refer to the phone user guide.
Ending a call Ending a call Ending a call Ending a call OR
OS Rejecting a call Rejecting a call Rejecting a call Rejecting a call (5 S)
Battery status Battery status Battery status Battery status OT
Turning the microphone off (and on) Turning the microphone off (and on) Turning the microphone off (and on) Turning the microphone off (and on) Muting the microphone Muting the microphone Muting the microphone Muting the microphone OU
Settings Settings Settings Settings Adjusting the speaker volume Adjusting the speaker volume Adjusting the speaker volume Adjusting the speaker volume OV
Master reset Master reset Master reset Master reset Prepare your headset according to page 14. Prepare your headset according to page 14. Prepare your headset according to page 14. Prepare your headset according to page 14.
Attaching the strap Attaching the strap Attaching the strap Attaching the strap PN
Troubleshooting Troubleshooting Troubleshooting Troubleshooting PO No connection between headset and phone Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low. The indicator light on the headset flashes red and you hear a low beep.
Voice commands PP Make sure that voice commands are enabled and recorded in your phone before you start using them. No connection between headset and phone Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone.Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low.
No connection between headset and phone PQ Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low. The indicator light on the headset flashes red and you hear a low beep. • The headset switches off if you do not add it to the phone within 10 minutes.
No connection between headset and phone PR Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low. The indicator light on the headset flashes red and you hear a low beep. • The headset switches off if you do not add it to the phone within 10 minutes.
Declaration of conformity for HBH-GV435a PS We, Sony Ericsson Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type DDA-0002013 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN 301 489-17, EN 301 489-7 and EN 60950 following the provisions of Radio Equipment and Telecommunication Terminal Equipment directive 99/5/EC with requireme
