User Manual

Confidential
USERS MANUAL
10(41)
Document number Revision
4/198 17-LXE 108 566 Uen PA6
2.3 System Connector Interface
2.3.1 Mechanical Overview
External interfaces to the module are made primarily through a 40 pin, standard 0.050-
inch pitch, ODU header show below.
Figure 4: 40-Pin System Connector
Figure 5: 40-Pin System Connector Pin Numbering
Description ODU Part Number Dimension A Dimension B
System Connector 515.569.035.140.xxx 24.13 mm 22.86 mm
Mating Ribbon Connector 525.060.035.040.xxx
SMT Mating Header 525.041.035.040.xxx
Ribbon cable, AWG 30 921.659.031.040.000
Table 1: System Connector and Mating Part Numbers
Please consult the ODU site for more information on mating options: http://www.odu.de