User's Manual

LZT 123 1836 95
11 Regulatory Notices
The GS64 described in this manual conforms to the Radio and Telecommunications Terminal
Equipment (R&TTE) directive 99/5/EC with requirements covering EMC directive 89/336/EEC
and Low Voltage directive 73/23/EEC. The product fulfils the requirements according to
3GPP TS 51.010-1, EN 301 489-7 and EN60950.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) The device must accept any interference received, including interference that may cause
undesired operation.
The GS64 modular transmitter is labelled with its own FCC ID number. In the normal method
of mounting the GS64 in a customer application the label is not visible to an end-user.
Similarly, the customer application itself may obscure the GS64 module entirely. If the FCC
ID is not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must display a label referring to the enclosed
module. This exterior label can use wording such as the following: “Contains Transmitter
Module FCC ID: PY7BC051022” or “Contains FCC ID: PY7BC051022”. Any similar wording
that expresses the same meaning may be used.
FCC ID PY7BC051022
This product has not yet received GCF or FCC approval
IC: 4170B-BC051022
Append Declaration