User's Manual

74
More features
Phone lock
Protect your phone against unauthorized use if it is
stolen and the SIM card is exchanged. You can
change the phone lock code (0000) to any four- to
eight-digit personal code.
Automatic phone lock
If the phone lock is set to automatic, you do not
need to enter your phone lock code until a different
SIM card is inserted in the phone.
To set the phone lock
1 } Settings } the General tab } Locks } Phone
Lock } Protection and select an alternative.
2 Enter the phone lock code } OK.
To unlock the phone
If the phone lock is on, enter your code } OK.
To edit your phone lock code
} Settings } the General tab } Locks } Phone Lock
} Change Code.
Keypad lock
Lock the keypad to avoid dialing a number by
accident.
Automatic keylock
In standby, automatic keylock means the keypad is
locked a short while after you last press a key.
To set the automatic keylock
} Settings } the General tab } Locks } Automatic
Keylock.
To lock the keypad manually
Slide the lock switch or open the phone and press
and hold } Lock Keys. You can still answer
an incoming call and the keypad locks again after
the call. The keypad remains locked until you
unlock it manually.
To unlock the keypad, slide the lock switch or
open the phone and press } Unlock.
Startup screen
You can select a startup screen that will appear
when you turn your phone on.
It is important that you remember your new code. If
you should forget it, you have to hand in your phone to
your local Sony Ericsson retailer.
Calls to the international emergency number 911 or
112 can still be made, even when the keypad is locked.
Ellen_UG.book Page 74 Friday, August 12, 2005 4:18 PM