User's Manual

28
Calling
Tips when recording and using voice
commands
If your phone cannot detect your voice command,
one of the following might have happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as you
do during a call.
• The voice command was too short – it should
be about one second long and more than one
syllable.
• You spoke too late or too soon – speak
immediately after the tone.
• You did not record the voice command when
the handsfree was attached – attach the
handsfree and then record.
• You used another intonation – use the same
intonation as the recorded voice command.
• The environment could be too loud or have
too much background noise.
Forwarding calls
If you cannot answer incoming calls, you can
forward them to another number, for example,
your answering service.
Select from the following forward options:
• Always Forward – forward all calls.
• When Busy – forward calls if you are already
on the phone.
• Not Reachable – forward calls if your phone is
turned off or if you are unreachable.
• No Reply – forward calls that you do not answer
within a specified time limit (service provider-
dependent).
To activate or deactivate a call
forward
1 } Settings } the Calls tab } Forward Calls.
2 Select a call type and then one of the forward
options Activate or Deactivate. If you have
selected Activate, go to step 3.
3 Enter the phone number to which you want
your calls to be forwarded, or } Lookup to find
the contact in your phonebook } OK.
When the Restrict calls function is activated, some
Forward calls options are not available.
S710a_UG_R1A.book Page 28 Thursday, September 30, 2004 10:24 AM