User's Manual

30
Calling
To activate voice dialing and
record names
1 } Settings } the General tab } Voice Control }
Voice Dialing } Activate } Yes and select a
contact.
2 If the contact has more than one number, use
and to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record a
voice command such as “John mobile” for the
phone number you selected.
3 Instructions appear. Lift the phone to your ear,
wait for the tone and say the command that you
want to record. The voice command is played
back to you.
4 If the recording sounds ok } Yes. If not } No
and repeat step 3.
5 To record another voice command for a contact
Edit Names } New Voice again and repeat
steps 2-5 above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name On or Off
} Settings } the General tab } Voice Control } Play
Caller Name.
Voice dialing
You can voice dial by saying a pre-recorded voice
command. Start voice dialing from standby using
the phone, a portable handsfree, or by saying your
magic word.
To make a call from the phone
1 From standby, press and hold one of the
volume buttons.
2 Lift the phone to your ear, wait for the tone and
say the name you recorded earlier, for example
“John mobile”. The name is played back to
you and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button.
The magic word
You can record a magic word and use it as a voice
command to allow totally handsfree access to voice
dialing. Instead of pressing and holding a volume
button to voice dial, you say the magic word and
Z500a_UG_R1A.book Page 30 Friday, August 13, 2004 1:41 PM