User's Manual

28 Calling
Draft for Sony Ericsson Internal Use Only - PA2
Before voice dialling
Activate the voice dialling function and
record your voice commands. An icon
appears next to a phone number that
has a voice command.
To activate voice dialling and record
names
1 } Settings } the General tab } Voice
control } Voice dialling } Activate }
Yes } New voice and select a contact.
2 If the contact has more than one
number, use and to view the
numbers. Select the number to add
the voice command to. Record a voice
command such as “John mobile”.
3 Instructions appear. Wait for the tone
and say the command to record. The
voice command is played back to you.
4 If the recording sounds OK } Yes. If
not } No and repeat step 3.
To record another voice command for
a contact } New voice } Add again
and repeat steps 2-4 above.
Caller name
Hear your recorded contact name
when you receive a call from that
contact.
To turn the caller name on or off
} Settings } the General tab } Voice
control } Play caller name.
Voice dialling
Start voice dialling from standby using
the phone, a portable handsfree, a
Bluetooth headset or by saying your
magic word.
To make a call
1 From standby, press and hold one of
the volume keys.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
To make a call with a handsfree
From standby, press and hold the
handsfree button, or press the
Bluetooth headset button.
The magic word
Record and use a voice command as
a magic word to activate voice control
without pressing any keys. The magic
word can only be used with a
handsfree.
Choose a long, unusual word or phrase
that can easily be distinguished from
ordinary background speech.