Assembly Instructions

2 (3)
Company Internal
MARKING DRAWING
Prepared (also subject responsible if other) No.
SEM/BGUDBB, Niklas Lövberg 151 86–SVV 107 447/1 Uen
Approved Checked Date Rev Reference
SEM/BGUDBB (Niklas Lövberg) 2006-06-22 C
3
Content Format
Line 3c
(22,2/24,0)
Location code of where the phone
is flashed, if applicable,
“FFF”
Text, height 1,2 mm.
According to 1050-LZT 108 6537.
Line 3d
(22,2/27,5)
Production week (flash), “yy’W’ww”
(yy = year, ww = week)
Text, height 1,2 mm.
Line 3e
(22,2/34,0)
Repair week, if applicable.
“Ry’W’ww”
(y = year, ww = week)
Text, height 1,2 mm.
Line 4a
(24,0/1,0)
Country approval mark 1
“FCC ID: PY7AD022042”
Text, height 1,2 mm.
Line 4b
(24,0/15,0)
Country approval mark 2
“IC: 4170B-AD022042”
Text, height 1,2 mm.
Line 5
(26,5/1,0)
Line 6a in bar code.
As desired by supplier (e.g. only
actual number).
Bar code, height 2,0 mm.
As desired by supplier (e.g. Code 128
symbology).
Line 6a
(28,0/1,0)
Supplier’s identification for trace-
ability of the telephone, as desired
by supplier (e.g. “S/N: nnn….” for
serial number).
Text, height 1,2 mm.
Defined by supplier.
Line 6b
(28,0/13,0)
Actual electronic serial number
(IMEI) of the phone (KRH),
“00000000-000000-0”
Text, height 2,0 mm.
In the format TAC-SNR-CD.
TAC and SNR derived from the
3/151 86- document in the 1095- for the
SVV.
CD = check digit according to the Luhn
formula (ISO/IEC 7812), GSM 02.16.
Line 6c
(28,0/28,5)
CE approval symbol.
Graphics, height 5 mm.
According to 1424-SVF 930 52.
Line 6d
(28,0/35,3)
The Notified body number.
“0682”
Text, height 2,0 mm.
Line 7a
(30,2/1,0)
Line 6b in bar code (only actual
number, without data identifier).
Bar code, height 2,0 mm.
Code 128 symbology, code C subset. If
uneven number of digits, code B subset
shall be used for the last digit.
Line 7b
(30,2/27,0)
Marking of origin.
The line shall be printed as stated
in chapter 3 in this document.
Text, height 1,2 mm.