User's Manual

17Calling
Video call
See a person on screen during calls.
Before you start
To make a video call, both you and
the person you are calling need a
subscription that supports the 3G
(UMTS) service, and you need to be
within range of a 3G (UMTS) network.
3G (UMTS) service is available when
the 3G icon appears in the status bar.
Video call demo mode
You can use most video call functions
without making a call, for example, to
prepare a camera view before calling.
} Video call.
To make a video call
When 3G (UMTS) service is available,
you can make a video call in one of the
following ways:
• Enter a phone number (international
prefix and area code if applicable)
} More } Make video call.
• Contacts and select the contact to call.
Use or to select a number } More
} Make video call.
• Video call } Call.... } Contacts to
retrieve a phone number } Call or
enter a phone number } Call.
To zoom the outgoing video in or out
Press to zoom in the outgoing video
and press to zoom out.
To accept an incoming video call
} Answer.
To end a video call
} End call.
Video call options
} More for the following options:
• Switch camera – to switch between
the main and video call cameras. Use
the main camera to show a full image
of your surroundings to the recipient.
• Stop camera/Start camera – turn the
video camera off or on. An alternative
picture is shown when off.
• Save picture – save the image shown
in the large view, for example, the
incoming caller image.
• Camera – options
• Brightness – adjust the level for the
outgoing picture.
• Turn on night m. – use when lighting
conditions are poor. This setting
affects the outgoing video.
• Sound – options during a video call
• Turn off speaker/Turn on speaker –
incoming sound.
• Mute microphone/Unmute mic. –
microphone off or on.
UG.book Page 17 Monday, March 20, 2006 1:37 PM
PPreflighted byreflighted byPreflighted by
( )( )( )