User's Manual

83
Troubleshooting
2 Enter a name associated with the code, }
Continue.
3 Enter the code } Done.
To change the passcode
1 } Organizer } Code memo and enter your
passcode } More } Change passcode.
2 Enter your new passcode } Continue.
3 Re-enter the new passcode } Continue.
4 Enter a checkword } Done.
Forgot your passcode?
If you forget your passcode, you must reset the
code memo.
To reset code memo
1 Enter any passcode to access the code memo
function. The checkword and codes that are
then shown are incorrect.
2 } Organizer } Code memo } More } Reset.
3 Reset code memo? is displayed } Yes. The
code memo is reset and all entries are cleared.
The next time you enter the code memo, you
must start by opening the code memo for the
first time.
Troubleshooting
Why doesn’t the phone work the way I want?
This chapter lists some problems that you might
encounter while using your phone. Some problems
require you to call your network operator, but you
can easily correct most of the problems yourself.
However, if you need to hand in your phone for
repair, please note that you may lose information
and content that you have saved in your phone.
You are advised to make a copy of such
information before handing your phone in for
repair.
For more support go to www.SonyEricsson.com/
support.
I have problems with memory
capacity or the phone working slowly
Possible cause: The phone memory is full or the
memory contents are not properly organized.
Solution: Restart your phone every day to free
memory and increase the capacity of your phone.
You also have the option to do a Master reset.
Some of your personal data and settings you have
made will be lost when doing this.
% 86 Master
reset.
Yui_UG_R1A.book Page 83 Tuesday, June 14, 2005 11:19 AM