User's Manual

23
Calling
3 Press Camera or open the lens cover to switch
cameras from the front camera to the back
camera. Hold the phone horizontally, so that
the person you are talking to will see the image
at a correct angle.
To adjust the brightness of the
outgoing video
Press to decrease the brightness, or to
increase the brightness of the outgoing video
picture.
To zoom the outgoing video in or out
Press to zoom in the outgoing video and press
to zoom out.
To accept an incoming video call
Press Answer.
To end a video call
During an ongoing video call, press End call.
Video call options
Press when using the front camera to view, and
select from, the following options:
• Stop camera/Start camera – turn off and on the
outgoing video camera. An alternative picture is
showed when the camera is off.
• Turn off speaker/Turn on speaker – turn off and
on the incoming sound during a video call.
• Mute microphone/Unmute mic. – turn off and on
the microphone during a video call (this option
is available during calls).
• Switch pictures – choose between showing the
incoming or the outgoing video in full size
display.
• Hide small pic./Show small pic. – choose if you
want to hide or show the small picture.
• Night mode – use when the lighting conditions
are poor. This setting affects the outgoing video.
• Advanced – to view, and select, the following
options:
• Alternative pic. – this picture will be shown
to the other party when you have turned off
the camera.
• Answer mode – choose whether the front
camera should be on or off when you
answer a video call.
Yui_UG_R1A.book Page 23 Tuesday, June 14, 2005 11:19 AM