User's Manual Part 1

28
To accept an incoming video call
Press Answer.
To end a video call
During an ongoing video call, press End call.
Video call options
Press when using the front camera to view, and select from the following options:
• Stop camera/Start camera – turn off and on the outgoing video camera. An alter
native picture is showed when the camera is off.
• Turn off speaker/Turn on speaker – turn off and on the incoming sound during a
video call.
• Mute microphone/Unmute mic. – turn off and on the microphone during a video
call (this option is available during calls).
• Switch pictures – choose between showing the incoming or the outgoing video in
full size display.
• Hide small pic./Show small pic. – choose if you want to hide or show the small
picture.
• Night mode – use when the lighting conditions are poor. This setting affects the
outgoing video.
• Advanced – to view, and select, the following options:
• Alternative pic. – this picture will be shown to the other party when you have
turned off the camera.
• Answer mode – choose whether the front camera should be on or off when you
answer a video call. If you answer with the front camera turned off, you can easily
turn it on by pressing Camera.
• Camera quality – select what picture quality to use for the outgoing video. This
setting will take effect at the next call – not during an ongoing call.
Video calls
You can also make video calls
from standby or from other
applications, such as contacts
or messages.
In standby, Calls, highlight a
number and press and hold
.
In contacts, highlight a number
a n d p r e s s a n d h o l d .
In a message, highlight a
number in the message and
press and hold .
VF_Nanami_UG_R1A.book Page 28 Tuesday, June 14, 2005 10:00 AM