User's Manual

Push to Talk (PTT)

Draft for Internal Use Only - PA2

To end a PTT call

Either wait for the call to time out from inactivity

or end the call by pressing More } End Call.

To make a Quick Group Call

Make a PTT group call without previously creating

a PTT group.

1 } to access your contact list.

2 Highlight the first member of the Quick

Group.

3 Select Quick Grp } Mark Sev.

4 Mark each contact you want in the quick group

call.

5 Press Continue.

6 Press and hold to call.

To change a Push to Talk Call to a

Cellular Call

1 While on a PTT call, the person who initiated

the call presses More } Change to Cellular.

You no longer need to press the PTT Key to

speak.

2 The other participants must press their PTT

Key to convert to a cellular call.

How a PTT call works

Instantly speak to other Cingular PTT subscribers

using PTT. Only one person at a time can speak

during a PTT call. PTT tones indicate if you can

speak or not.

PTT Floor Held tone

You hear this tone when you press and hold the

PTT Key. The tone indicates you can speak and be

heard by other call participants.

PTT Floor Release tone

You and all other call participants hear this tone

after you release the PTT key. Before hearing this

tone, you were heard by the other call participants.

This tone signals other call participants that the

floor is open and they may speak by pressing their

PTT key.

Error tone

You hear this tone when attempting to speak when

someone else still has the floor.