User's Manual

42
Push to Talk (PTT)
Draft for Internal Use Only - PA2
To edit an existing contact or group
1 Press to access your contact list.
2 Highlight the contact or group you want to edit
and press More.
• For groups you created, you may add or
remove members and rename or delete the
group.
• For a group that you join, you may leave or
rename the group.
• For a single contact, you can rename or
delete the contact.
PTT calls
To make a PTT call
1 Press to access the PTT contacts list.
2 Select the contact or group you want to call.
Make sure the contact or group shows
Available or Silent/Vibrate.
3 Press to activate the call. After the tone
sounds you have the floor and may begin
speaking. Once the connection is established,
the screen changes to a timer to indicate the
duration of your call.
4 Hold the PTT key down while speaking.
Release it when you are not.
5 To end the PTT session, press More } End
Call. You will be automatically disconnected if
there is no activity for 30 seconds.
To receive a PTT call
1 For the best results, set your ringer to the
highest volume setting.
2 If your status is available, a tone signals an
incoming PTT call. The caller’s information
appears on the screen and you automatically
hear the caller’s voice.
3 When the phone is in silent mode, the caller’s
information appears. A vibrating alert replaces
the tone. You must manually accept the PTT
call when the phone is in silent mode.
• Answer – transfers the caller’s voice to the
ear speaker.
• Busy – ends the call. PTT calls are not
forwarded to voicemail.
If the clamshell is closed, the Contacts screen appears
on the external display. Use the volume keys to scroll
through the list.
Use Voice Message to leave a voicemail for
unavailable contacts.