User's Manual

29
Calling
Draft for Internal Use Only - PA2
from each other, % 31 Tips when recording and
using voice commands.
Before voice dialing
You must first activate the voice dialing function
and record your voice commands. An icon appears
next to a phone number that has a voice command.
Phone numbers must be in your contact list before
adding voice commands. An icon next to the
contact name indicates a voice command is
associated with that contact.
To activate voice dialing and
record names
1 } Settings } the General tab } Voice Control
} Voice Dialing } Activate } Yes } New Voice
and select a contact.
2 If the contact has more than one number, use
and to view the numbers. Select the
phone number to which you want to add the
voice command. Now you are going to record a
voice command such as “John mobile” for the
phone number you selected.
3 Instructions appear. Wait for the tone and say
the command that you want to record. The
voice command is played back to you.
4 If the recording sounds ok } Yes. If not } No
and repeat step 3.
5 To record another voice command for a contact
} New Voice } Add again and repeat steps 2-4
above.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive a call
from that contact.
To turn the caller name on or off
} Settings } the General tab } Voice Control } Play
Caller Name.
Voice dialing
You can voice dial by saying a pre-recorded voice
command. Start voice dialing from standby using
the phone, a portable handsfree, a Bluetooth
headset or by saying your magic word.
To make a call from the phone
1 From standby, press and hold one of the
volume buttons.
2 Wait for the tone and say the name you
recorded earlier, for example “John mobile”.