User's Manual

24
Calling
Draft for Internal Use Only - PA2
amount of memory available on the SmartChip, see
Address Book } Options } Advanced } Memory
Status.
To add a phone contact
1 } Address Book } New Contact } Add.
2 Enter the name directly or press Add and enter
the name } OK.
3 Enter the number directly or press Add and
enter the number } OK.
4 Select a number type.
5 Scroll between the tabs and select fields to
enter more information. To enter symbols, for
example, @ in an email address } Symbols and
select a symbol } Insert.
6 When you have entered the information
} Save.
To add a SmartChip contact
If SmartChip contacts are default contacts, follow
the same steps as for adding a phone contact. You
can add only name and number to SmartChip
contacts.
Pictures and personal ringtones
You can add a picture and a personal ringtone to a
phone contact. When that person calls, the picture
is displayed (provided your subscription supports
the Calling Line Identification service) and the
ringtone is played.
To add a picture, light effect or a
ringtone to a phone contact
1 } Address Book and select the contact you
want to add a picture, ringtone or light effect to
} More } Edit Contact.
2 Use , , and . to scroll to the
relevant tab. } Picture:, Ringtone or Light
Effects } Add.
3 Select a picture, sound or light effect } Save to
save the contact.
Calling contacts
You can call one of the numbers saved for one of
your contacts, or a number on your SmartChip.
If phone contacts are set as default, you can
choose to call from contacts or from the
SmartChip.
If SmartChip contacts are set as default, you can
only call the numbers on the SmartChip.
Contact Cingular for more information.