User's Manual

This is the Internet version of the user's guide. © Print only for private use.
9
Getting started
3 Wait approximately 4 hours or until the battery
icon indicates that the battery is fully charged.
If you do not see the battery icon after this time,
press a key to activate the screen.
4 Remove the charger by pulling it straight out.
PIN (Personal Identity Number)
You may need a PIN (Personal Identity Number)
to activate the services in your phone. The PIN
is associated with your SIM card, and not with the
phone. Your PIN is provided by your network
operator. When you enter your PIN, each digit appears
as *, unless your PIN starts with the same digits as
an emergency number, for example 112 or 911.
This is so that you can see and call an emergency
number without entering a PIN.
If you make a mistake while entering your PIN,
delete the number by pressing .
Turning on the phone and
making calls
Make sure that the phone is charged and your SIM
card is inserted before you turn it on. When you have
turned the phone on, you can use the setup wizard
to quickly and easily prepare your phone for use.
Some functions use more battery power than others
and may cause a need for more frequent re-charging.
However, talk-time or standby time may become
noticeably shorter due to wear and you may have
to replace your battery. Only use approved batteries
from Sony Ericsson
% 84 Battery Use and Care.
If you enter the wrong PIN three times in a row, the
SIM card is blocked and the message PIN blocked
appears. To unblock it, you need to enter your PUK
(Personal Unblocking Key), % 74 SIM card lock.