User's Manual

More features 73
• When you access your codes, they are displayed for
a limited time only.
To open code memo for the first time
1. Scroll to Organizer, Code Memo.
A message with instructions appears.
2. Press
OK.
3. Enter a four-digit password to open Code Memo,
OK.
4. Re-enter the new password to confirm.
5. Enter a checkword (maximum 15 characters),
OK.
The checkword can consist of both letters and
numbers. To enter a number, press and hold the key.
To add a new code
1. Scroll to Organizer, Code Memo.
2. Enter your password.
3. Select New Code,
Add.
4. Enter a name associated with the code, for example,
the name of the credit card company,
OK.
5. Enter the code,
OK.
To open code memo
1. Scroll to Organizer, Code Memo.
2. Enter your password,
OK.
Your entered checkword appears. When the
decryption process has finished, your codes are
displayed.
To change the password
1. Open code memo as described above.
2. Press
Other, Change Password.
3. Enter your new password,
OK.
4. Re-enter the new password,
OK.
5. Enter a checkword,
OK.
Forgot your password?
If you forget your password, just enter any password
to access the Code memo function. The checkword
and codes that are then displayed are incorrect. You
must now reset the Code memo.
To reset code memo
1. Press
Other, Reset.
2. Reset code memo? appears. Press
Yes.
The Code memo is reset and all entries are cleared.
The next time you enter the Code memo, you must
start at “To open code memo for the first time” on
page 73.
T610UG-R4A.book Page 73 Friday, March 21, 2003 3:28 PM