User's Manual

More features 71
One number
If you have a SIM card that does not support
separate fax and data numbers, the phone does not
recognize the type of incoming call.
If you want to receive a fax or data call, you have
to set the phone to one of these options. Once you
have set your phone for a specific incoming call, it
stays like this until you change it.
To select the call type you want your next incoming
call to be, scroll to Calls, Next Call, Next Incoming
Call.
More features
Alarm clock
The alarm can be set to ring at a specific time within
24 hours, or recurrently at a specific time on several
days. You can have both these alarms set at the same
time. Even if you have set your phone to silent, the
alarm and timer signals ring. The alarm clock also
rings if the phone is turned off.
To set an alarm
1. Scroll to Organizer, Alarms, Alarm.
2. Enter the time,
Save.
• To change the alarm time, scroll to Organizer,
Alarms, Alarm, Set New Time.
• Press any key to turn the alarm signal off when it
rings. If you do not want the alarm to be repeated,
press
Yes.
• To cancel the alarm, scroll to Organizer, Alarms,
Alarm, Cancel.
• To set a recurrent alarm, scroll to Organizer, Alarms,
Recurrent Alarm. Then enter the time and select the
days that you want the alarm to recur by scrolling
and pressing
Check. Press Save to exit the menu.
T610UG-R4A.book Page 71 Friday, March 21, 2003 3:28 PM