User's Manual

60 Setting up WAP and e-mail
• Your user ID to log on to the external data
network.
• Your password to log on to the external data
network.
• Password request – if this setting is on, you are
asked for a password each time you log on to the
external data network.
• Preferred service – if you want to be able to
accept incoming calls during a GPRS session,
select Automatic. If not, select GPRS Only.
• The IP address that the phone uses when
communicating with the network. If you do not
enter an address, the network provides you with a
temporary IP address.
• If the network does not provide the IP address to
the DNS server automatically, you may enter it
here.
• Advanced settings – these are optional. Consult
your network operator.
GSM settings include some settings that are similar
to GPRS settings and some that are GSM specific as
follows:
• The phone number of your Internet service
provider.
• Select the speed you want for the connection.
• Select analogue or ISDN connection.
Note: If you want to change access type, you have to
create a new data account and select the access type
you want to use.
Preferred service
You can set GPRS or GSM as the preferred service.
To select preferred mode
• Scroll to Connect, Data Comm., Preferred Service
and select GPRS and GSM or GSM Only.
WAP security
Your phone has support for WAP secure browsing.
When you turn on security, the connection between
your phone and the WAP gateway is secure.
Note: Security for a connection between a WAP
gateway and a WAP service provider is the
responsibility of the WAP service provider.
T610UG-R4A.book Page 60 Friday, March 21, 2003 3:28 PM