User's Manual

32 Calling
To turn voice dialing on and record
number types
1. Scroll to Settings, Voi c e C o ntro l, Voice Dialing.
2. Select On. Now you are going to record a voice
command for each number type you use with your
Phonebook contacts, for example, “home” or
“mobile”.
3. Instructions appear. Press
Yes.
4. Select a number type,
Yes.
5. Lift the phone to your ear, wait for the tone and say
the command that you want to record. The voice
command is played back to you.
6. If the recording sounds OK, press
Yes to save the
voice command. If not, press
No and repeat step 4.
7. Repeat steps 4 and 5 for each voice command
you need.
You also need to record voice commands for each
contact name, for example, “John”.
To record a voice command for a contact name
1. Scroll to Settings, Voi c e C o ntro l, Voice Dialing,
Edit Names, Add Voice Tag.
2. Select a contact.
3. Follow the instructions in the display.
An icon appears next to a contact name that has a
voice command.
Caller name
You can choose whether you want to hear the
recorded contact name when you receive an
incoming call from that contact.
• To turn the caller name On or Off, scroll to Settings,
Voice Control, Caller Name.
Voice dialing
You can voice dial by saying a pre-recorded word or
by using specific key sequences.
To make a call
1. From standby, press and hold a volume key for one
second.
2. Lift the phone to your ear, wait for the tone and say a
name, for example “John”. The name is played back
to you.
3. If you have several numbers for that contact, after
a second tone say the number type, for example,
“home”.
The number type is played back to you, and the call
is connected.
T610UG-R4A.book Page 32 Friday, March 21, 2003 3:28 PM