User's Manual

20 Personalizing your phone
To compose a ring signal or melody
1. Scroll to Pictures & Sounds, Music DJ.
2. Choose to insert a selection of pre-recorded music
blocks. You can choose from four different
selections.
3. Copy and paste these blocks to build up your
melody.
4. Select
Other to play the melody and view other
options.
Note: To edit your own melody, scroll to Pictures &
Sounds, My Sounds, select the melody and press
Other. Select Edit.
To send a melody
1. Scroll to Pictures & Sounds, My Sounds.
2. Scroll to a melody,
Other.
3. Select Send.
4. Select a transfer method.
Note: To send a ring signal or melody in a text
message, see “To insert an item in a text message”
on page 45.
Receiving melodies
You can receive a sound or melody via IR, Bluetooth
wireless technology, text, picture message, or
download it via WAP. When you receive the sound
or melody, press
Save to save it in My Sounds.
Increasing ring
You can choose a ring signal that rises in steps from
the lowest volume to the highest.
To turn increasing ring On or Off,
Scroll to Settings, Sounds and Alerts,
Increasing Ring.
Specific ring signals for personal calls
If you subscribe to the Two Line Service,
you can set different ring signals for the two
voice lines. Line 1 and Line 2 are displayed
instead of Voice Calls.
If your subscription includes the Calling Line
Identification (CLI) service, you can assign a
personal ring signal to up to ten callers.
To set a specific ring signal for a caller
1. Scroll to Phonebook, Personal Rings, New Contact.
2. Enter the first letters of the contact,
OK.
3. Select a contact.
4. Select a ring signal.
T610UG-R4A.book Page 20 Friday, March 21, 2003 3:28 PM