User's Guide

94
Settings
Checking the access point you use
1
From the Settings screen (P.93),
tap [Wireless & networks] X
[Mobile networks] X [Access Point
Names].
･ Available access points (APN)
appear.
･ It is recommended that you use the
displayed access point without editing.
❖Information
･ If you have several available connections, a
marked radio button to the right indicates the
active network connection.
Setting an access point
additionally
1
From the Settings screen (P.93),
tap [Wireless & networks] X
[Mobile networks] X [Access Point
Names].
2
Press t.
3
Tap [New APN].
4
Tap [Name], enter a name and tap
[OK].
5
Tap [APN] and enter the access
point name and tap [OK].
6
Tap and enter all other information
required by your network operator.
7
Press t, then tap [Save].
❖Information
･ Do not change the MCC/MNC. If you change MCC/
MNC to other than the default value (440/10), the
settings do not appear on the APNs screen. When
the MCC/MNC settings do not appear on the APNs
screen, make APN settings with [Reset to default]
or [New APN] again.
･ Note that, when using the prediction conversion by
one-byte alphabet entry mode (English mode) with
mark in [Auto space] checkbox on Japanese
keyboard settings screen (P.67), spaces may be
entered automatically. In this case, delete spaces.
By initializing an access point, the default
state is restored.
1
From the Settings screen (P.93),
tap [Wireless & networks] X
[Mobile networks] X [Access Point
Names].
2
Press t, then tap [Reset to
default].
Initializing an access point